Schuberth SC2 - Radio doesn’t switch on while connected to my bike

markus

27. November 2022 13:06

Hi,

I have a Schuberth C5 with a SC2 intercom (firmware is 1.1). I have some issues with the FM radio functionality. The SC2 works normal when its stand alone, which means not connected to mobile phone or bike. When I press the „minus“ button, FM radio switch on and there is a „FM on“ voice prompt. When the SC2 is connected to my BMW 1250 GS (firmware 23-011-060) it the radio doesn’t switch on at all. When i press the minus button for a second, there is a beep, but no radio or „FM on“ voice prompt. Nothing happen. I already did several reset attempts on the SC2 and deleted the connections on my bike and reconnected my mobile and the SC2, bot there is no changes. The radio does switch on, on the minus button press without the bike connection and doesn’t while it is connected. It seems to be an issue with the SC2 firmware as my Sena 20s and 50S don’t have this problems.

0

• 

  AntonisKiriazis

  10. Dezember 2022 20:04

  Hi markus,

  Joining...the club as I have the same issue!

  First installation today with the same latest firmware, I discovered the problem when after playing some music during the first ride with my BMW 1250 GSA, I paused the music through the "wheel" and tried to press minus button in order to switch  on radio, but nothing happened.

  I pulled over and pressed SC2 main button just to switch it off...but I pressed it way to much and did a factory reset of the device. I paired TFT and SC2 again and after that I managed to turn on radio by pressing minus button...The thing is that, as I have reached at my destination I turned off my bike and I after that I turned off radio and SC2. When I started to come back, I turned on radio through minus button...BUT I couldn't turn it off!

  I tried to shut down the unit while riding but I wasn't able to do it. When I parked and switched off my bike, by pressing the minus button the radio turned off!

  So, definitely there is a conflict between the connection with the BMW TFT (as it seems that wants to take full control of the unit which is connected with it) and doesn't leave the SC2 to interfere! 

  Also my 50S H/K and 20s Sena units that I had, they didn't have the issue.

  Ofcourse, as I said it's my first day and I haven't play enough with the settings and all the functions, but something isn't right for sure.

   

  0
• 

  markus

  21. Januar 2023 17:07

  In the meantime I could find a workaround for the issue. After my cell phone and the sc2 connect with the bike I must switch the sc2 remote control off and switch it on again. After this the radio will turn on while pressing the „-„ button.

  0

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.