20s issues & volume and pairing
RE: 20S-
Purchased June 21, 2015
Haven't heard from Sena on this so-
Wife and I out for vacation. Bike- BMW LT,
Connected to 20s
Garmin 660LM
Iphone 6
Wife’s SMH10
(wish Escort would work!!)
COM was really good until- the Garmin came on. It was super loud. Very distorting to the speakers. I turned it WAY down.
Then I could not talk to my wife. I had to turn the volume way back up and she would have to hit her Intercom button on the SMH10. They we were fine till the Garmin came back on….VERY LOUD. Painful.
I went into the 660LM menu, VOLUME. Message is to adjust the volume with the connected Bluetooth device, ie. 20S.
I then went into Garmin menu to MIXER and adjusted all mixer levels to 10%. This did not help.
So, my wife turned off the SMH10 as I could not get navigation and talk to her. When the Garmin announced, it was super loud with distorted speakers. Turned down to an acceptable level.
The next time it announced, it was again super loud. Turned down again. Repeat- Repeat- Repeat…!!!
Rebooted several times with same result
Useless.
Also, it seems that when in COM with wife, we have Bluetooth un-pairing and she has to re-push the pairing button. Again..aggravating.
Last week before we left, I connected both with the SENA software to updated all firmware as this has been an issue.
At times, I think we loose power and have to power from bike- even though they just came off the charge less than an hour before.
So, what to do?????
-
I'm having the EXACT same issue with a Garmin 665LM and the 1.7.5 firmware. This is SENA's firmware screw up. I did a factory reset on the 20S and also had to do one on the 665 to get it to delete the pairing. In my case, I didn't get my ears blasted by GPS directions at max volume over and over again if I was in an intercom conversation with my wife on her 20S. It's only when there is no intercom that the 20S makes my ears bleed. It makes the 20S completely worthless for turn by turn spoken directions. SENA needs to fix this garbage firmware. I'm going to see if I can find an earlier firmware to install in the mean time.
1 -
I have the exact same problem. I have an iPhone with the Scenic App that I use for voice guidance. If I'm traveling alone, I can control the volume on my headset so it doesn't blast out of the helmet. But if I'm paired with my riding buddy and just the volume so I can hear him speak, the GPS voice is SUPER LOUD and hurts. So I turn the volume down so the GPS doesn't hurt my ears, but then I can't hear him. Is there any way to control the volume separately? I have turned the volume down on my phone, but that doesn't do anything. I'm running 1.7.5 firmware. Please help!! Thanks!
1 -
Nearly a year later and Sena still has not corrected their firmware.
0
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.
Kommentare
3 Kommentare