how to bluetooth sph10 to helmet bluetooth netphone v2-500
I tried following the directions to pair my new sph10 to other Bluetooth device, I have a set of helmets with Netphone v2-500 headsets installed. both units stayed in search mode and trying to sync from either unit didn't seem to work. Did I miss something in the instructions?
-
Is your SPH10 using the latest firmware, v5.0? You can use the Sena Device Manager (which can be downloaded here: http://www.sena.com/support/software/emailcheck/) to find out. If it is using v5.0, then perform a Factory Reset on the SPH10 and follow these instructions for placing the SPH10 into Universal Intercom mode:
1. Turn on the SPH10 and a non-Sena Bluetooth headset which you want to pair with.
2. Press and hold the Jog Dial on the SPH10 for 8 seconds until the blue LED flashes rapidly. You will hear a voice prompt saying “Universal intercom pairing”.
3. Perform the operation required for handsfree pairing on the non-Sena Bluetooth headset (refer to the users’ manual of the headsets you want to use). The SPH10 will automatically perform pairing with non-Sena Bluetooth headsets in pairing mode.
0
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.
Kommentare
1 Kommentar