GP10+SMH10R NO AUDIO

Kommentare

1 Kommentar

  • Sena
    Sena

    Even though you already mentioned it, please perform a Factory Reset on both the SMH10R and the GP10. Afterwards, pair them together again by placing the SMH10R into Intercom Pairing mode by holding down the Center Button for 5 seconds until the LED is flashing red rapidly and hold down the Pairing Button on the GP10 for 5 seconds until the LED is flashing red and blue rapidly. Then wait for voice prompt to confirm that they are connected together.

    0

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.