microphone extension cable
A microphone extension cable for the SMH-A0302. The microphone cable is too short to use with my flip helmet.
-
I ran into the same issue in using a wired microphone in Nolan modular helmet.
A longer microphone wire, about 2 inches, would do the trick.
2 -
Just installed a SMH10R with the wired mic into a Bell Revolver flip-up helmet. I cut the wired mic cable and extended it by about 4 inches and it works great. I had an autocom before and what I didn't like was the boom mic and the cable from the helmet the autocom system. I love this setup! Sena, could you provide an extension cable in future kits. Flip-up helmet owners would be please by it!
3 -
Now 11-12 years after the original post, I bought two SMH-10 kits to build a paramotor-helmet with 3M-Peltor earcups.
I need to put the SENA-unit slightly on the back, so I needed a standalone mic and bought also the SMH-A0302 and realized like others that the mic-cable is ridiculously short. If possible I would order a 15-30cm extension-cable for the mic and one for one of the speakers as well, with both male and female connectors.
Any new solutions?0
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.
Kommentare
3 Kommentare