Feature Request: Selective Un-pairing
When you pair your GPS, smartphone, and other intercom units to the 20S (and also to previous products), you do it individually, of course.
But there seems to be only one "Unpair" function, "Unpair all devices". It means that if I need to unpair one device or intercom pairing, I have only one option, unpair from EVERYONE and EVERYTHING and start all over. Am I reading and doing this wrong?
This is a pain. Sena help has asked me to unpair my Garmin (which is paired as phone #1) and re-pair it as Phone #2; and let them know the results. To do this, if I'm reading it right, I have to unpair from everything and everyone and start over.
At least have selective un-pairing from Phone1, Phone2 separate from intercom un-pairings.
Maybe the iPhone app will help. Let me unpair my Zumo and pair my iPHone instead. (oops, I'll lose all pairings)
Ken
-
Thtat would be useful 0 -
Good idea! I have been re-pairing everything each time I want to connect a new device to get it the right order.
0 -
Good idea! I have been re-pairing everything each time I want to connect a new device to get it the right order.
0 -
Ken, you don't have to unpair from everything each time. If you only need to unpair one device then you need to remove the 20S from that device in the device's Bluetooth menu. In the scenario you have mentioned of having Intercom, a Garmin GPS and an iPhone and you need to swap them then you only need to remove the 20S from the GPS and Forget the Device (20S) on the iPhone and then pair those devices to the 20S accordingly. The intercom pairing does not need to be removed in that case. If you do a Factory Reset or select the Delete All Pairings setting in the Configuration Menu, then you have to repair everything and everyone back together again.
0 -
Thank you. I believe I understand.
Ken
0
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.
Kommentare
5 Kommentare