Will SRL3 pair to 10S and is there a 3.5mm jack option for SRL3?
As per title, I have two questions.
Myself and my partner have been using the 10S for many years, but I'm changing my helmet and looking to get the SRL3 system, but my partner will still have a 10S.
We found that the 10S fitted on the SMH10 clamp which allowed us to use our wired earplugs with monitors (even though Sena said this wasn't possible 😉 ) .
1 - Will the SRL3 and the 10S pair up OK? I know they are both Bluetooth, but wanted to double check
2 - Is there any way to add a 3.5mm jack plug to the SRL3 system? I have seen some DIY posts but wondered if there were any plug-in adaptors? (A bit like the A0101 splitter cable)
Thanks
-
There are none made specifically for the SLR3, I've checked, since the speakers that come with the SLR3 are not great.
Not very loud at higher speeds, audio is low grade, very tinny sounding, minimal lows.. Sound like a set of headphone from the Dollar Tree (where everything cost $1.25 now, due to inflation)The SLR3 uses the little tiny connection adapters to connect the microphone to right side speaker, and the left side speaker to the control unit.
The right side speaker is connected via a larger adapter..Sure something could be DIYed.. but you would need to find the similar connectors, and do some cutting/soldering.. 3.5mm Jacks (AUX) wiring is as basic a it comes, it's 2 wires (Positive & Negative) .. well there is a 3rd, Shield, but technically that is not required, it just helps with feedback issues..
The connectors on the "10R Earbud Adapter Split Cable" look similar to the SLR3 (accept where the right side speaker connects to the control unit, again that one is bigger because its got the connection for the right speaker and the microphone)
0 -
We're using an SRL2 and SRL3. SRL2 doesn't do mesh, and is Bluetooth only, similar to the 10S.
Unfortunately it's basically impossible to get a reliable connection between the two devices. It seems that the SRL3 only reliably connects with other mesh-type devices. When the SRL3 connects to a Bluetooth intercom the connection works fine up to ~10 meters. Further away, sound starts crackling and then skipping. You can't really understand anything anymore after ~50m distance. I have a support ticket open, but no solution so far.
0 -
GoPromotional products Myself and my partner have been using the 10S for many years, but I'm changing my helmet and looking to get the SRL3 system, but my partner will still have a 10S.We found that the 10S fitted on the SMH10 clamp which allowed us to use our wired earplugs with monitors.
0
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.
Kommentare
3 Kommentare