SRL3 Wifi Connection...
Help: I set up my SRL3 WiFi adapter on my network and it updated the firmware fine...once. When I did it again a month or so later to check for a new update, the WiFi adapter couldn't seem to find my network, even after using a pin to reset it. My network finds everything else that comes close to it to connect. I have to delete the adapter from the SENA app, then re-add it for it to be found, each time!. The instructions say this has to only be done once, I have to do it every time. What gives?
-
Offizieller Kommentar
Hello,
When you plug in your WiFi adapter, do not connect your SRL3 until the WiFi adapter is updated.
Follow the usual process to connect to the WiFi adapter and update its firmware first; it’s the same process as for the SRL3.
Once the WiFi adapter is updated, you can connect your SRL3 to it.
You can also verify the SRL3 connection using a desktop PC through the Sena Device Manager.
-
If your router supports both, try resetting different SSIDs (fall guys) for 2.4GHz and 5GHz to see if the adapter recognizes them correctly.
0
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.
Kommentare
2 Kommentare