Bluetooth keeps disconnecting every 5 seconds.
-
I have exact same problem.
Pixel 8 and sena 10S.
Firmware 2.11 -
After investigation, I went to the Bluetooth settings in my pixel phone. I turn off "allow device phonecall" and the app stop flickering
But now, Im not sure I can do phone call1 -
If your Bluetooth device keeps disconnecting every 5 seconds, there could be several causes behind the issue. First, ensure that both the Bluetooth device and the connected device have sufficient battery power, as low battery levels can cause connectivity problems. Interference from other wireless devices, such as Wi-Fi routers, microwaves PLUG Stock, or even other Bluetooth devices, can also disrupt the signal.
-1 -
Bonjour à tous,
Je viens également de faire l'acquisition d'un Sena 50S. Je suis également en possession d'un téléphone Google Pixel (7 Pro), et à ma grande déception je me suis donc retrouvé dans la même situation que vous!!!
Après quelques recherches et tests, je viens (du moins je l'espère car pour moi cela fonctionne) de trouver la solution afin de pouvoir faire en sorte que mon Sena 50S soit en capacité de reconnaître mon téléphone Pixel comme téléphone et non pas uniquement comme lecteur de média.
Pour cela, il faut commencer par activer le mode développeur sur votre téléphone Pixel (appuyer un certain nombre de fois, 7 fois de mémoire, sur le "Numéro de build" depuis les "Paramètres" du téléphone puis dans le menu "A propos").
Aller ensuite dans le menu "Système" depuis les "Paramètres" du téléphone, et enfin dans le nouveau menu "Options pour les développeurs".
Enfin cherchez le paramètre appelé "Version Bluetooth AVRCP" qui a pour valeur par défaut "AVRCP 1.5" et choisissez la valeur "AVRCP 1.4".*
Maintenant il ne vous reste plus qu'à supprimer votre intercom de votre liste d'appareils bluetooth, puis de le reconnecter en suivant la procédure standard d'ajout d'un nouvel appareil bluetooth. Et hop la magie opère !!!
Big Up a tous🤘
4 -
Made an account just to thank you for sharing the solution Flow!
You the real MVP!
0 -
As Flow mentioned, playing with the AVRCP seemed to have made it work.
I went to 1.6 as 1.4 did not fix it.
Maybe its just from disconnecting, forget device and re-add a couple of times that worked.
Im pretty sure my Sena unit is Ok and my phone is just retarded. Been having issues with it pairing with my Carplay since day one!0 -
Flow's solution worked for me as well. Sena 10s with Pixel 7.
0 -
Same here, 1.6 did the trick, 1.4 did not worked (Pixel 5 / LineageOS 14 / Sena SC1)
0 -
Flow's solution worked perfectly! As Jonathan Rooney and Faust mentioned, version 1.6 also does the trick, and even 1.4 works as well. I tested this on a Google Pixel 8 Pro running GrapheneOS (Build No. 2024120400) with a Senna SRL3 (Special Edition for Shoei Neotec 3).
Thanks to everyone for the helpful input!0
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.
Kommentare
9 Kommentare