Update Sena 30K Firmware on Windows 11

Darin Spence

16. April 2025 23:35

The Device Manager doesn't recognize my Sena 30K when I plug it into a USB port on my Windows 11 PC. I tried a different USB cable, and conformed bot work with an9ther device. I also rebooted Windows with advanced start up settings and disabled the driver signature requirement.

0

• 

  Darin Spence

  16. April 2025 23:36

  I want ti update over wifi but dont have the special cable.

  0
• 

  Darin Spence

  20. April 2025 16:02

  Anyone found a way to update the 20S and 30K?

  1
• 

  Paul Jacob

  23. April 2025 04:44

  It is possible that the driver for the Sena 30K is not installed properly or the device is in charging mode instead of transferring data. 

  https://community.sena.com/hc/en-us/community/posts/36673279539732level devil-Update-Sena-30K-Firmware-on-Windows-11

   

  0
• 

  Darin Spence

  25. April 2025 16:17

  That link isn't working for me. Can you send it again please?

  0
• 

  Darin Spence

  25. April 2025 16:19

  Is there a way to take the Sena 30K device out of charging mode?

  0
• 

  Norbert Wietfeldt

  17. August 2025 18:22

  Bei mir funktioniert es nur mit dem mitgelieferten Kabel und dem device Manager.

  0
• 

  Benbent8631

  16. September 2026 09:01

  I had a very similar issue with my Sena 30K on Windows 11. Trying another cable and USB port is a good start, but it may also be worth checking whether Windows detects it under “Universal Serial Bus controllers” or “Other devices” instead of Device Manager showing it by name. Hopefully there’s a simple driver or USB connection fix for this.

  https://community.sena.com/hc/en-us/community/posts/3667327953973level devil-Update-Sena-30K-Firmware-on-Windows-11

  0

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.