Tom Balaban
- Gesamtaktivitäten 22
- Letzte Aktivität
- Mitglied seit
- Folge ich 0 Benutzer
- Gefolgt von 0 Benutzer
- Stimmen 0
- Abonnements 3
Aktivitätsübersicht
Neueste Aktivität von Tom Balaban-
Tom Balaban hat einen Post erstellt
SR-10 Interface to Motorola Digital trunking radios
HI, I will need to connect mu SR-10 to a Motorola digital trunking radio, the kind that connect the speaker mic using a tab and a screw. There is no socket to plug into. Does anyone have a sugges...
-
Tom Balaban hat einen Kommentar hinterlassen
Startv, Do with the cable what you do with your earbuds. I put mine in the same pouch I use for the earbuds when I'm not wearing them and that stays in my tank bag. That way I lose everything in on...
-
Tom Balaban hat einen Kommentar hinterlassen
Stuartv, I use my SMH-A0303 base with the original helmet speakers. This required disconnecting the speakers from the original base and adapting the 3.5mm coiled extension cable that came with one ...
-
Tom Balaban hat einen Kommentar hinterlassen
It's in the Yaesu FTM10 Pinout PDF in the post above.
-
Tom Balaban hat einen Kommentar hinterlassen
Gareth, Attached are the pin-outs for the FTN10 and the Sena SR10 Cable. Please note: All you need is the 6 pin Hirose connector pinout on the right side of the SR10 sheet Sena SR10 Cable Pinouts.p...
-
Tom Balaban hat einen Kommentar hinterlassen
I'm sure it will work with both. When I get home on Wednesday I'll post the pin-outs.
-
Tom Balaban hat einen Kommentar hinterlassen
I'm sure it will work with both. When I get home on Wednesday I'll post the pin-outs.
-
Tom Balaban hat einen Kommentar hinterlassen
Yes, Refplusten. I have two VX-6Rs and have used the CT-91 to connect to the more common ICOM connectors on my old Motocomm and Autocom systems. It works great with the SR-10 as well. It's super e...
-
Tom Balaban hat einen Kommentar hinterlassen
Gennadiy, Any detail/photos you can provide on this solution are appreciated. Thanks.
-
Tom Balaban hat einen Kommentar hinterlassen
The SR10 comes with a decent PTT switch that attaches near your hand grip. I prefer a semi-permanently mounted switch and have installed an Air Rider PTT switch (http://www.airrider.com/product_p/0...