Matt
- Gesamtaktivitäten 8
- Letzte Aktivität
- Mitglied seit
- Folge ich 0 Benutzer
- Gefolgt von 0 Benutzer
- Stimmen 0
- Abonnements 1
Aktivitätsübersicht
Neueste Aktivität von Matt-
Matt hat einen Kommentar hinterlassen
Hi Peter. Yes, by powering them all from the same supply you run the risk of creating another loop. In practice it may be ok but it would be best to just power the Sena from the DC/DC converter.
-
Matt hat einen Kommentar hinterlassen
Hi Peter. I've got it mounted under the seat on my Fazer MkII (there's a load of room under the seat). It's in a small plastic box to keep it out of trouble, similar but a bit smaller than the one ...
-
Matt hat einen Kommentar hinterlassen
IIRC when paired with a headset, using PTT and charging a flat battery it was peaking around 320mA@12v so just under 4W (with a DMM measuring current on the bike side of the bike power kit). Others...
-
Matt hat einen Kommentar hinterlassen
Sorry, the buy link should have been to Farnell not Onecall - Onecall is just for eduation. http://uk.farnell.com/tracopower/tel-5-1212/converter-dc-dc-5w-12v/dp/1204969 Matt
-
Matt hat einen Kommentar hinterlassen
The solution i've been using for about 5 months now is to isolate the Sena from the bike power supply using a DC-DC isolation transformer like those built into the very expensive products listed el...
-
Matt hat einen Kommentar hinterlassen
Thanks Peter, I look forward to it. It also struck me that an alternative if you are just using the a radio with the sena was to isolate the SR10 power supply from the bike with a simple isolated D...
-
Matt hat einen Kommentar hinterlassen
Hi Peter, Did you ever get this built? If so would you be willing to post the schematic and parts list? Cheers, Matt