Hellen charless

1. Community
2. Tips & Troubleshooting
3. Mesh connection between phantom and Stryker

Try putting both helmets on Open Mesh, Channel 1 then toggle Mesh off and back on. If they still would not connect, switch both to Mesh 2.0 and try again. Also make sure both have the latest firmwa...

1. Community
2. Tips & Troubleshooting
3. Vortex Charging

If you mean the new Sena VORTEX, it actually does support USB-C charging. Sena has confirmed that the charging LED should light up when using the supplied USB-C cable. If yours only seems to charge...

1. Community
2. General Discussion
3. Pinlock Insert for Stryker

Looking for Pinlock Insert for Sena Stryker Hi everyone, Does anyone know where I might still be able to find a Pinlock insert for the Sena Stryker helmet? Everywhere I’ve checked seems to be out o...

1. Community
2. Feature Requests and Suggestions
3. 3.5mm ear bud port on mount

I agree that was a genuinely useful feature on the 50S. A dedicated 3.5mm port with separate volume controls made using earbuds much more convenient. Bringing that functionality back on newer model...

1. Community
2. Feature Requests and Suggestions
3. 60S Voice Assistant Handling with 2 Phones

I agree, this would be a really useful firmware improvement. If Phone 1 is designated as the primary phone, it makes sense for voice assistant requests to stay routed there even when Phone 2 is bei...

1. Community
2. General Discussion
3. Half Helmet Mount for 60X?

I ran into a similar compatibility issue with mounts before. I’d check whether the manufacturer offers a specific adapter for the 60X or a newer half-helmet mount designed for that model. Since you...

1. Community
2. General Discussion
3. SENA Strayker

Hola, siento que estés teniendo este problema. Si el Sena Strayker no carga después de probar diferentes cosas, yo empezaría por comprobar lo más básico antes de pensar que el casco está defectuoso...

1. Community
2. General Discussion
3. SENA Strayker

nice