beans
- Gesamtaktivitäten 122
- Letzte Aktivität
- Mitglied seit
- Folge ich 0 Benutzer
- Gefolgt von 0 Benutzer
- Stimmen 0
- Abonnements 50
Kommentare
Neueste Aktivität von beans-
I would suggest the following. 1. factory reset the 20s 2. delete the 20s on your phone 3. factory reset the freewire Make sure you are doing the factory resets correctly. Pair the 20S to your free...
-
Look at the note #2 in page 31. Note: 2. To activate the voice command during non-stand-by functions, tap the Ambient Mode Button or double tap the surface of the main unit. When you are in music...
-
Dart451, If you look at the user guide, "Hello Sena" only works when the 20S is in standby mode. When your 20S is playing music it is no longer in standby.
-
You cannot use the Westone Bluetooth as a replacement to the 20S speakers. What you do is pair your Westone Bluetooth directly with your phone instead if you just want to listen to music.
-
Make sure you are pressing the correct button on the 20S when trying to pair with your phone. Use the smaller button on the side on the 20S. Do you hear the 20S say "Phone pairing" and does the LED...
-
Ged, At 98% it is done doing the firmware update. You can unplug it and turn it on. If it turns on perform a factory reset, delete the previous pairing in your phone, and re do the pairing. To pair...
-
At 98% the firmware is done writing to the 20S. If it stops, this means that the 20S is not able to reboot itself back up. To recover from this you can hit the reset button located at the back of t...
-
Check the cig charger's fuse. You can unscrew the tip of the charger (the end that plugs in to your bike).
-
Hello, You have to use the cigarette charger that came with the Freewire. This charger works with the bike's ignition.
-
Hi Franck, The SMH10R is not the same as the new 10R. I know this model naming is confusing to all (sigh). The 10R is a newer model. The Sena utility app is not compatible with the SMH10R nor the X...