
Ken Thompson
New user of Sena products, just like many of you here.
- Gesamtaktivitäten 38
- Letzte Aktivität
- Mitglied seit
- Folge ich 0 Benutzer
- Gefolgt von 0 Benutzer
- Stimmen 8
- Abonnements 12
Aktivitätsübersicht
Neueste Aktivität von Ken Thompson-
Ken Thompson hat einen Kommentar hinterlassen
Not a Sena employee... The hardware limitations, along with the Bluetooth version implemented with those devices, will not allow for your use case to be viable. Sena provided me with a very lengthy...
-
Ken Thompson hat einen Kommentar hinterlassen
"I would like to know what are the changes for the new firmaware ? Does any one know this ? Sena ?" Yeah, so would many of the rest of us, but it would seem the crew over at Sena Central have a sli...
-
Ken Thompson hat einen Kommentar hinterlassen
Published release info seems to be several weeks behind the firmware release on any given update. In 2025, nothing like this should be released without having *what* changed available.
-
Ken Thompson hat einen Kommentar hinterlassen
¡Gracias por la actualización del software la versión 2.7! La estoy instalando en mis auriculares mientras escribo esto.
-
Ken Thompson hat einen Kommentar hinterlassen
"Version 2.7 has already been released, which repairs the damage that 2.6 did in the 50s... Thanks Sena" ¡Gracias por la actualización del software! La estoy instalando en mis auriculares mientras ...
-
Ken Thompson hat einen Kommentar hinterlassen
The device itself can't connect directly to WiFi, but rather thru the iOS or Andriod phone app. Has that been attempted?
-
Ken Thompson hat einen Kommentar hinterlassen
I have purchased 15" long IEM wires for my use (Mee Audio MX1), but also use a short extension cable for this very reason. The helmet clamp base is where a ~12" long straight 3.5mm male connector i...
-
Ken Thompson hat einen Kommentar hinterlassen
If things are configured properly in the 50S, then, yes, your Mesh connection will be reestablished.
-
Ken Thompson hat einen Kommentar hinterlassen
If you have the Sena app, make sure all users are in the correct Mesh mode (2 vs. 3) as they are not compatible.
-
Ken Thompson hat einen Kommentar hinterlassen
Press the "P" button to answer, if you don't have it configured to auto-answer a call.