Using Mesh Intercom in Open Mesh

Open Mesh is an open group intercom function. Users can freely communicate with each other in the same Open Mesh channel and select which channel (1-9) to use through the headset.

It can connect with a virtually unlimited number of users in each channel.

mceclip1.png

Starting Mesh Intercom

When Mesh Intercom is enabled, the 30K will automatically connect to nearby 30K users and allow them to talk to each other by pressing the Mesh Intercom Button.

Mesh Intercom On

Mesh_Intercom_On_-_30K.PNG

 Mesh Intercom Off

Mesh_Intercom_Off_-_30K.PNG

Channel Setting (Default: channel 1)

If the Open Mesh communication experiences interference because other groups are also using channel 1 (default), change the channel. You can select from channels 1 to 9.

mceclip3.png

Enter into the Channel Setting

mceclip4.png

Navigate Between Channels
(1 --> 2 --> ••• --> 8 --> 9 --> Exit --> 1 --> •••)

mceclip5.png

Save the Channel

mceclip6.png

 

Note:

  • Channel Setting always starts with channel 1.
  • If you do not press any button for approximately 10 seconds in a specific channel, the channel is automatically saved.
  • If you want to cancel during Channel Setting, tap the Phone Button.
  • The channel will be remembered even if you turn off the 30K.
  • You can also change the Channel Setting of the headset through the Sena Device Manager or the Sena 30K Utility App.
Have more questions? Submit a request

0 Comments

Article is closed for comments.