Pairing with Other 10C Headsets for Intercom Conversation


The 10C can be paired with up to three other headsets for Bluetooth intercom conversation. 1. Turn on the two 10C headsets (A and B) that you would like to pair with each other. 2. Press and hold the Jog Dial of the headset A and B for 5 seconds until red LEDs of the both units start to flash rapidly. You will hear a voice prompt, “Intercom pairing”.

  1. Simply tap the Jog Dial of any one of the two headsets A and B, and wait until the LEDs of both headsets turn to blue and intercom connection is automatically established. The two 10C headsets A and B are paired with each other for intercom conversation. If the pairing process is not completed within one minute, the 10C will return to stand-by mode. A
  2. You can make other pairings between headsets A and C, and between headsets A and D by following the same procedure as above.
  3. The intercom pairing queue is ‘Last-Come, First-Served’. If a headset has multiple paired headsets for intercom conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second intercom friend, and third intercom friend.


Note: For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is the second intercom friend of headset A, and headset B is the third intercom friend of headset A.

Have more questions? Submit a request


Article is closed for comments.