10C - A2DP Stereo Music Only


  1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps.
  2. Within 2 seconds, tap the Jog Dial again, then the LED flashes red and you hear “Media selective pairing”.
  3. Search for Bluetooth devices on your smartphone. Select the Sena 10C in the list of devices detected on your phone.
  4. Enter 0000 for the PIN. Some mobile phones may not ask for PIN.
Have more questions? Submit a request


Article is closed for comments.