SMH10R - Configuration Menu

You can set the configuration of the SMH10R by the voice menu instructions as below.

1. To enter the voice configuration menu, press and hold the Center Button for 12 seconds until the LED shows solid blue and you hear high tone double beeps. You will also hear the voice prompt saying “Configuration menu”.

2. Tap the (+) Button or the (-) Button to navigate between the menus. You will hear voice prompts for each menu item as below.

3. You can enable / disable a feature or execute a command by tapping the Center Button.

4. If you want to exit configuration immediately, tap the (+) Button or the (-) Button until you hear the voice prompt saying “Exit configuration”, then tap the Center Button.

The voice prompt for each menu item is as follows:

Have more questions? Submit a request


Article is closed for comments.