SMH10 - Phone Selective Pairing

1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps.

2. Within 2 seconds, tap the Phone Button again, then the LED turns to blue flashing and the beeps turn to multiple mid-tone beeps. You will hear a voice prompt saying “Phone selective pairing”.

3. Search for Bluetooth devices on your smartphone. Select the Sena SMH10 in the list of devices detected on your phone.

4. Enter 0000 for the PIN. Some smart phones may not ask for PIN.

Have more questions? Submit a request


Article is closed for comments.