10R - GPS Pairing

 1. Press and hold the Jog Dial for 5 seconds until you will hear a voice prompt saying “Intercom pairing”.

2. Within 2 seconds, double tap the Phone Button and you will hear the voice prompt saying “GPS pairing”.

3. Search for Bluetooth devices on the GPS navigation. Select the Sena 10S in the list of the devices detected on the GPS.

4. Enter 0000 for the PIN.


When Audio Multitasking is enabled, if you pair your GPS device via GPS Pairing, its instructions will not interrupt your intercom conversations, but will overlay with them.

Have more questions? Submit a request


Article is closed for comments.