10C - GPS Pairing

Typical Bluetooth headsets can connect with only one Bluetooth device, but a second mobile phone pairing allows the headset to connect with another Bluetooth device such as a second mobile phone, an MP3 Player, GPS or the Sena SR10, the Bluetooth adapter.

  1. To pair the GPS, press and hold the Jog Dial for 5 seconds until the red LED flashes rapidly and you hear a voice prompt, “Intercom pairing”.
  2. Within 2 seconds, tap the Phone Button again, then the LED flashes blue rapidly and you will hear a voice prompt, “Second mobile phone pairing”.
  3. Search for Bluetooth devices on your GPS. Select the Sena 10C in the list of the devices detected on the GPS.
  4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
  5. The GPS confirms that the pairing is completed and the 10C is ready to use. You will hear a voice prompt, “Your headset is paired”.
Have more questions? Submit a request

0 Comments

Article is closed for comments.