10Upad - GPS Pairing

GPS Pairing

1. Press and hold the Center Button for 10 seconds until you will hear a voice prompt saying “Configuration menu”.

2. Tap the (+) Button until you will hear a voice prompt saying “GPS pairing”.

3. Search for Bluetooth devices on the GPS navigation. Select the Sena 10Upad in the list of the devices detected on the GPS.

4. Enter 0000 for the PIN.

Note:

When Audio Multitasking is enabled, if you pair your GPS device via GPS Pairing, its instructions will not interrupt your intercom conversations, but will overlay with them.

Have more questions? Submit a request

0 Comments

Article is closed for comments.