Using the Mesh in Open Mesh

When Mesh Intercom is enabled, the headset will be in Open Mesh (default: channel 1) initially. 

Channel Setting (Default: channel 1)

If the Open Mesh communication experiences interference because other groups are also using the channel 1 (default), change the channel. You can select one of 1 to 9 channels.

1. To enter into the Channel Setting, double tap the Mesh Intercom Button until you hear a voice prompt, “Channel Setting”.

2. To save one of the channels, tap the (+) or (-) Button to navigate between the channels until you hear a voice prompt, “(#)”. Then, tap the Center Button.  mceclip0.png

Have more questions? Submit a request


Article is closed for comments.