Mobile Phone Pairing

There are two ways to pair the phone.

Initially Pairing the OUTRUSH

The Bluetooth system will automatically enter the phone pairing mode when you initially turn on the Bluetooth system or in the following situations:

• Rebooting after executing the Factory Reset feature; or

• Rebooting after executing the Delete All Pairings feature.

1. Rotate while pressing the Jog dial clockwise for 1 second. You will hear a voice                prompt, “Phone pairing”.

2. Select the OUTRUSH in the list of the devices detected on the mobile phone. Enter        0000 for the PIN. Some mobile phones may not ask for the PIN.


Have more questions? Submit a request


Article is closed for comments.