It would be nice if it were possible to mount the SMH10 on a helmet in such a way that it didn't hang down below the bottom edge of the helmet. I sometimes like to use a Leatt brace, especially when riding offroad, but the SMH10 hangs too far down and interferes with the brace. Some other bluetooth headsets provide a mounting option that doesn't use a clamp and instead sticks to the helmet above the lower edge, thereby not interfering. The SMH10 has tape to stick it on instead of using the clamp, but the lip on the base requires that it still be positioned along the lower edge. I can see why this would be required when using the boom mic, but for the kit that uses the wired mic this shouldn't be an issue.
Thanks for a great product!