Failed to recognize device. Cannot open USB [1][N]
I recently purchased a 10C Pro and am unable to update the firmware. I have downloaded the SENA device manager a couple times now, yet I keep receiving the error message "Failed to recognize device. Cannot open USB [1][N]" after following the steps in the manager (power off, plug in, hold phone button for 5 secs, click NEXT). I am on a MacBook Pro 2015 running OS Big Sur 11.4.
Things I have tried:
- formatted the 64GB SDHC card using the 10C Pro
- different USB ports
- another USB cable I had lying around (I've been using what was supplied)
- Fault reset
- Tried to update on a 2012 MacBook Pro with the same results
Nothing seems to work and it's super frustrating. I've already submitted a ticket which was an exercise in patience, but I thought I'd see if anyone here has ever solved this apparently common issue. I've read you need to use USB 2.0 but I don't have any computers less than 3.0 right now. The device seems to work OK after testing it out on my helmet but I'd really like to have the latest firmware and be able to keep updating it after paying so much money for this thing.
-
Update: I was able to successfully update my device after digging up an old USB cable from an LG cell phone and trying that. So I guess my advice to anyone struggling with the same problem is try as many USB cables as you can.
I also gave the manager as many permissions as I could in the system preferences > security and privacy menu, although I tried many times after that without success before getting this cable to work on the first try. The only other thing I did (which I'm pretty sure I tried before) was hold the phone button for 5 sec and then hit NEXT in the device recognition step without releasing the button.
Pretty absurd that this is what fixed it. I guess most of the MSRP goes into manufacturing the hardware because it sure doesn't go into their programming team.
2 -
+1 this on my 50s and Windows 10 PC. I think it was more an issue between the cable and the PC than anything to do with the SENA unit.
0 -
I tried many times with the SRL2 in a MacBook Air (Monterrey 12.4) without any positive connection, always the same, impossible to open USB [1][N]. Same computer, same SUB cable, same USB port, successful connection to Sena K30, without any problem, in the first time. I think there is a problem with SRL2 and must be solved by Sena, as soon as possible. Please contact me.
Thanks1 -
It was definitely the cable for me. I used an Apple USB-C cable (came with my iPad) and it immediately connected.
Sena 50s
1 -
I am sure glad I found this! I had the same issue and found another USB-C cable. Unbelievable that they have us use a worthless device to update firmware.
1 -
It seems that I'm not alone. Finally, I used a USB cable from my old Samsung Notes and it worked just fine.
1 -
My Sena SRL will not connect to computer. error : Failed to recognize divice. Cannot open USB. Divice Manager version 4.3.8 I use Windows 11 computer.
1 -
If the first cable you try doesn't work try a different cable. The units are fussy about which cable they like and which they don't.
0 -
I know the problems with the cables. But the cables I used before where working on my Win 10 computer. Now that I have a Win 11 computer they don't do the job anymore. I tried different other ones from my Samsung phone my Samsung Tab and a new original cable that was in the box of my last SRL I bought. Nothing seems to do the job.
0 -
I think it has something to do with the drivers.
0 -
If you use a USB 2.0 port instead of USB 3.0, see if that helps.
0 -
For me it was not the cables, but failure to follow the instructions exactly with 10R, so in case someone is having the same, I address it here:
it is important that the 10R is NOT powered on when you push the (-) button. Just plug the cable and start the app, push (-) for more than 5 secs and click next on the app. This solved it for me as I first believed it should be turned on in the first place... which was not the case apparently.
0 -
Sena SRL Mesh
Device Manager install is not installing the drivers, since it's not recognizing the device when using the original cable (Wifi cable).
Using a standard USB / USB C cable solved the issue.0 -
THat information (WiFi-Cable not being usable for update from PC) is documented in the manual.
Bonus details: the WiFi-cable has a small embedded Linux system sitting in the thick end which handles the updating over WiFi.0 -
Hello,
I have just solved the issue talking with a support guy.
In my case, I have LINKIN RIDE PARK III and I was trying to upgrade the firmware using Windows 10 and WIndows 11. I have used many different cables, but I was always getting same error: USB cant be opened.
From support team sent me some instructions in order to change the startup seetings of the PC. Basically what I did is to allow controllers not signed.
The steps are:
- Click on Start
- Click on Settings
- Click on Update & Security
- Click on Recovery
- Find it where it says “Advanced Startup” and click Restart Now
- The following screen will show up:
- Click Troubleshoot
- Click Advanced options.
- Click Startup Settings - note that this option may be hidden and you may have to click “more options”
- Click Restart.
- Press the number 7 on your keyboard to Disable driver signature enforcement.
Once you go through the steps above stop here and try opening your Sena Partner Device Manager and connecting your device to it. your computer will restart and you will be able to fully install the software.
0 -
I tried the same but don’t get that number 7 ? Press the key with 7 on it? Doesn’t do anything, or is it f7? This step confuses me..
tried it 2 times did not work
Then did get it to do wifi update only to end with rubbish program on iphone 11 with english auto and version 1.15? Or something while i should be installing 2.21? For my sena 50 R version 2.
Really rediciulous for such a top brand, at least in pricing.and spent the whole evening on it i was fuming out of my ears.
device keeps stopping giving info on route directions unless i play music constant,seems it powers down completely after a few minutes
0 -
Hi Everyone,
I had the similar problem of USB not recognized and came upon this post. Created an account just to thank all those who gave their inputs. As mentioned in this post , the adaptor they gave were not working. I used an latest type-c to type-c to update the firmware in the end.
0 -
Answer from sena it is mentioned in the manual.. pff well maybe but i did not find it and why don’t they include such a cable with it when you buy it? its not that sena is the cheapest brand..
0 -
I too found that once I used the USB cable that came with the headsets I was magically able to connect. I'm not sure what's special about the cable they ship with the headsets, but I tried at least five others, many used for data connections, and they didn't work. Very interesting..
0
Please sign in to leave a comment.
Comments
19 comments