Sena SRL2 : Pairing doesn't work
Hello Guys,
I have just bought a Sena SRL2. I followed the user guide but the pairing doesn't work. I explain what it happens. I push the central button during 12 seconds, after that i push the button + and the leds didn't flashe red and blue alternately.
I don't understand what it happens. I have reseted SRL2, updated the firmware but i always the same problem.
Can you help me ?
Thanks in advance.
Regards.
-
What are you trying to pair? Your phone or the intercom?
0 -
Yes I try to pair my iPhone.
0 -
Press and hold center button until you hear "configuration menu" through the speakers. Release then tap the + button and you should hear "phone pairing" through the speakers. You will then hear multiple beeps. Go to you iPhone, open settings, then go to bluetooth. When SRL shows up at the bottom of the bluetooth page, tap on it. Give it a few moments and it will then move up to the pairing list and show connected. You should also get an audio confirmation through the SRL speakers. Once paired you should no longer need to do this procedure as the unit remembers the pairing.
0 -
Thanks Ken. But when I press the center button during 12s, I don’t hear « configuration menu » but the led flashes in red.
After I press on + button, and it happens nothing…0 -
You may have to hold it a bit longer. 12 sec is approximate. You should hear the prompt. I would also check to see that your volume is up all the way.
0 -
There is a good youtube video on this. Google search SRL2 phone pairing and it should be the first match.
0 -
Ken, i find the problem.
I didn’t wait enough when I pressed to center button. When you press to the button, the leds flash in red, after that the voice say « hello » and after that you have to press + button.Many thanks for your help.
Have a good day.
0
Please sign in to leave a comment.
Comments
7 comments