Pablo Motta
- Total activity 2442
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1661
Comments
Recent activity by Pablo Motta Sort by recent activity-
Hi, These mics are available here: http://www.buysena.com/powersports/smh5.html?p=3
-
Your firmware update is done at 90%. Hit the reset hole in the back of the unit to restart.
-
Hi George, You need to submit your request here: http://www.senaindustrial.com/support/contact_support/ You have a SENA Industrial product.
-
Two things your can try. 1. This could be a contact issue. try to re-seat the main unit in the clamp. 2. you can try to loosen the two allen screws in the clamp. if its too tight this could preven...
-
Jason, As long as the Bluetooth adapter uses "HFP" to connect to the headset. Most Bluetooth adapters I've seen are A2DP. Using A2DP Bluetooth adapter will conflict with your phone's music. And A2...
-
How exactly are you doing the pairing? Here are the steps: 1. Turn on both 20s 2. Hold down the jog dial button (round silver button) for about 6-7 seconds, on both 20s until it says Intercom Pairi...
-
Samuel, You should be able to use your phone for phone calls while the PD10 is also connected to the SMH10. If the PD10 is already connected to the SMH10, the music on your phone won't play - this ...
-
Scott, The mic does not get disabled when using the ear bud connector on the base unit. Make sure your phone is still connected to your Bluetooth headset.
-
Jim, You should have bought the SR10 adapter for your radar. The SR10 is a HFP device only. You can pair the SR10 using Multipoint pairing on the 20S to use the 2nd HFP on the 20S.
-
Hi Mpatnode, At this time, the 20S can only share music with another 20S. It will not share music with a smh10