Ken Thompson
New user of Sena products, just like many of you here.
- Total activity 42
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 9
- Subscriptions 14
Comments
Recent activity by Ken Thompson-
Desensitize the VOX system - turn off VOX Intercom & VOX Phone & disable Smart Volume Control.
-
NOTE: Not a Sena rep, but... Try "VOX Intercom" off and "smart volume control" to off. The first issue (wind noise) may well be interfering with your second problem (unable to hear shared music vi...
-
Not a Sena employee... The hardware limitations, along with the Bluetooth version implemented with those devices, will not allow for your use case to be viable. Sena provided me with a very lengthy...
-
¡Gracias por la actualización del software la versión 2.7! La estoy instalando en mis auriculares mientras escribo esto.
-
"Version 2.7 has already been released, which repairs the damage that 2.6 did in the 50s... Thanks Sena" ¡Gracias por la actualización del software! La estoy instalando en mis auriculares mientras ...
-
The device itself can't connect directly to WiFi, but rather thru the iOS or Andriod phone app. Has that been attempted?
-
I have purchased 15" long IEM wires for my use (Mee Audio MX1), but also use a short extension cable for this very reason. The helmet clamp base is where a ~12" long straight 3.5mm male connector i...
-
If things are configured properly in the 50S, then, yes, your Mesh connection will be reestablished.
-
If you have the Sena app, make sure all users are in the correct Mesh mode (2 vs. 3) as they are not compatible.
-
Press the "P" button to answer, if you don't have it configured to auto-answer a call.