Juan - Sena Support
- Total activity 417
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 2
- Subscriptions 266
Activity overview
Latest activity by Juan - Sena Support-
Juan - Sena Support created an article,
Factory Reset
If you want to restore the headset to factory default settings, use the Factory Reset in the configuration menu. The headset automatically restores the default settings and turns off. To do a Facto...
-
Juan - Sena Support created an article,
Fault Reset
When the Sena Expand Boom is not working properly or is faulty for any reason, you may reset it by pushing the pinhole reset button at the back of the headset main unit. 1. Rotate the speaker pad ...
-
Juan - Sena Support created an article,
Pairing with Other Sena Expand Boom Headsets for Intercom Conversation
The Sena Expand Boom can be paired with up to three other headsets for Bluetooth intercom conversation. 1. Turn on the two Sena Expand Boom headsets (A and B) that you would like to pair with each ...
-
Juan - Sena Support created an article,
Mobile Phone Pairing
Initially Pairing the Expand BoomThe headset will automatically enter the phone pairing mode when you initially turn on the headset or in the following situations: • Rebooting after executing the F...
-
Juan - Sena Support created an article,
Music Sharing
You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation. When you terminate music sharing, you can go back to the intercom conversati...
-
Juan - Sena Support created an article,
Bluetooth Stereo Music
You can listen to stereo music from your Bluetooth wireless audio device. You can not only adjust the volume but also use functions such as play, pause, next track and previous track. • To adjust t...
-
Juan - Sena Support created an article,
Mobile Phone Call Making and Answering
1. When you have an incoming call, tap the Center Button to answer the call.2. To end a call, press and hold the Center Button for 2 seconds until you hear a mid-tone single beep, or wait for the c...
-
Juan - Sena Support created an article,
Volume Adjustment
You can easily adjust the volume by tapping the (+) Button or the (-) Button. You will hear a beep when the volume reaches maximum or minimum level. The volume is set and maintained independently a...
-
Juan - Sena Support created an article,
Checking the Battery Level
When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 flashes = High, 70~100%3 flashes = Medium, 30~70%2 flashes = Low, 0~30%
-
Juan - Sena Support created an article,
Charging
The charging LED beside the charging port turns red while charging, and turns to blue when the headset is fully charged. It takes about 2.5 hours to be completely charged. You can use the Sena Expa...