Juan-Sena-Support

Juan-Sena-Support

  • Total activity 418
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 2
  • Subscriptions 267

Articles

Recent activity by Juan-Sena-Support Recent activity Votes
  • Factory Reset

    1. To restore the headset to factory default settings, press and hold the Phone Button for 10 seconds until the LED shows solid red. 2. Press the Jog Dial to confirm reset. The headset will be res...

  • Mesh Intercom Public Mode

    Open Mesh is an open group intercom function. Users can freely communicate with each other in the same Open Mesh channel and select which channel (1-9) to use through the headset. It can connect w...

  • Using Mesh in Group Mesh

    Group Mesh is a closed group intercom function that allows users to join, leave, or rejoin a group intercom conversation without pairing each headset. Users can freely communicate with each other i...

  • Checking the Battery

    When the +mesh is powering on, the red LED flashes rapidly indicating the battery level. 4 flashes = High, 70~100% 3 flashes = Medium, 30~70% 2 flashes = Low, 0~30%

  • Power On/Off

    To power on the +mesh, press and hold the Multi-function Button for 1 second.To power off the +mesh, press and hold the Multi-function Button for 1 second.

  • Powering On and Off

    Powering OnPress and hold the Center Button and the (+) Button at the same time for 1 second to power on. Powering OffTap the Center Button and the (+) Button simultaneously.

  • Factory Reset

    If you want to restore the headset to factory default settings, use the Factory Reset in the configuration menu. The headset automatically restores the default settings and turns off. To do a Facto...

  • Fault Reset

    When the Sena Expand Boom is not working properly or is faulty for any reason, you may reset it by pushing the pinhole reset button at the back of the headset main unit.  1. Rotate the speaker pad ...

  • Pairing with Other Sena Expand Boom Headsets for Intercom Conversation

    The Sena Expand Boom can be paired with up to three other headsets for Bluetooth intercom conversation. 1. Turn on the two Sena Expand Boom headsets (A and B) that you would like to pair with each ...

  • Mobile Phone Pairing

    Initially Pairing the Expand BoomThe headset will automatically enter the phone pairing mode when you initially turn on the headset or in the following situations: • Rebooting after executing the F...