Keith
- Total activity 133
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 16
Comments
Recent activity by Keith-
Hi Ken, I've tested "Hello Sena" enough. It's VERY easy to verify. Turn on the unit, do/say nothing for 90 seconds and then try "Hello Sena". It consistently worked for me with firmware version ...
-
Hi Ken, I don't know of any other way to read their response. From my experience, it appears that they are already turning the mic off after 60 seconds, which kills the "Hello Sena" command at that...
-
I've had the same problem with 4 different units. I got a dual pack (S/N 14XXXX units). I fully charged them and put them back in the box. Two weeks later, I turned them on and they both immediatel...
-
Ok. I know I'm beating a dead horse at this point, but I just wanted to report another finding. After testing the battery life of my S/N 15XXXX replacement units, I fully charged both of them and...
-
I'd actually prefer the "Hello Sena" command to work. It's a great feature that makes the unit completely hands free. Which is great on a bike. And it works fine for me.......with firmware version ...
-
Hello, I sent my battery life findings to Sena. Below is their response: ========================================================================== As noted in the comparison chart from:http://www....
-
Ok. I received the replacements for my two RMA'ed 20S units. They are both S/N 15XXXX units shipped running firmware version 1.3. And they both came with the new cradle that has the aluminum latch....
-
I've RMA'ed both of my 14XX units for the battery life issue. I didn't have a problem with the latches. I was very careful when mounting/unmounting the units. But, they are obviously delicate. You ...
-
Stand-by mode is nothing more than letting the unit sit idle without intercom calls, phone calls, FM radio on or any other operations being performed. It's just waiting to be told to do something. ...
-
Ok. With a full charge, my 20S shut down after 35 hours in stand-by mode running version 1.3. I got less than 24 hours running version 1.2. This is with the unit mounted on a helmet and sitting on ...