Sena 30K Mesh Not Working
I have experienced the loss of the mesh communication on my Sena 30k after replacing the bulging battery. It now announces that the mesh communication is on, but no channel number. I can go to the app on my phone and change the channel number, but it has no effect on the Sena 30K. I called the help desk and went thru all of the reset steps for the unit to include resetting the mesh. Still did not work. You would think that this is a design flaw and Sena would be more than willing to stand behind their product. I have not found that to be the case as of this posting.
-
Comentario oficial
once the battery bulges, the mesh chip has a 50/50 chance of being damaged, in this case that what has happened. although, if your device is under warranty we will replace it.
-
seems as if you know, you have a problem with the battery that causes a problem with the Sena electronic chip, you’d figure a way to compensate your customers for this design defect.
0 -
Once the battery bulges, there's a 50/50 chance the mesh chip gets damaged. If it's under warranty, we'll replace it.
0 -
Hola; a mi me sucedió lo mismos con mi Sena 30K. Y lo más triste es que también se encuentra vencida la garantía. Si esta es una falla recurrente en este dispositivo; ¿cómo Sena nos puede ayudar?
0 -
I had the same Problem one one of my 30k´s.
But i managed to fix it, i took it apart and applied slight presure on the mesh communication chip while turnig mesh on, and it worked.
So i resoldered the area that i supplied pressure to and now its working again without any problems.
on my device it was a bad solder joint of the chip that caused the issue.
1 -
Hello, Marcanthonydorn! What is the chip did You resolder? I didn't found what chip is made for MESH
0
Iniciar sesión para dejar un comentario.
Comentarios
6 comentarios