Conncating BlueTooth Radio
Is there any way to connect BT two way radio (like Interphone Tribe or Midland G8 BT) directly to Sena S20? I tried different approaches (as phone, as second phone) but non of them succeeded - they just did not pair. I did previously have Midland BT Next and Cardo Q9 and there was no probem to connect Interphone Tribe PMR to either one.
-
was there a resolution to this, looking to do the same with a Midland G8 BT.
0 -
We don't have experience in pairing with this particular radio, but I have the user manual for the midland g8 bt. See the following instructions to pair with a SENA headset.
Midland radio follow these instructions..
Before pairing, the Bluetooth function on G8E-BT must be disabled, so switch
off the radio.
Then, turn it on again while keeping the BT button pressed. To confirm the
pairing, the display will show ‘bt PA’ and ‘PA’ will blink.
You will have about 1 minute time to start the same procedure with Your headset
(read carefully the instructions of your headset). When both units are
paired, the display will show ‘BT’ steady. From this moment, both devices are
paired and they will identify each other even though they have been switched
off; so, there’s no need to repeat the pairing procedure.On the SENA 20S headset follow these instructions
- Turn on the SENA headset.
- Then press and hold the phone button (smaller button) for 6 seconds or until the blue and red LED flashes rapidly.
Wait for both radio and headset to pair. It should take less and 30 seconds to pair.
0
Iniciar sesión para dejar un comentario.
Comentarios
2 comentarios