11B wind noise managing

Comentarios

4 comentarios

  • Comentario oficial
    Alex - Sena Support
    Alex - Sena Support

    Hello,  

    The wind noise may be caused by the helmet itself rather than the unit, as the unit is integrated into the helmet. Consider using a wind blocker under the helmet to reduce buffeting from your torso.  

    If the helmet doesn’t fit snugly, empty spaces could trap wind and amplify noise, which may also contribute to the issue.  

  • coyilan
    coyilan

    The wind noise may be caused by the helmet itself rather than the unit, as the unit is integrated into the helmet. Consider using a wind blocker under the helmet to reduce buffeting from your torso. If the helmet doesn’t fit snugly, empty spaces could trap wind and amplify noise, which may also contribute to the issue. Spotify Premium PC

    -1
  • Raphael
    Raphael

    Hi Walter,

    I don't have the same helmet as you but a similar setup (Sena 50R with modular helmet Caberg Levo). I have realized, then if i open the ventilation flap on the chin bar/guard the noise level changes. I would also try to bend the micro upwards or downwards to see if somethings changes. Did you install the micro correct - with the sensor towards the mouth ?

    0
  • walter luciani
    walter luciani

    Hi Raphael,  

    Thanks for your input. I will play around with the mic. In my mic I do not see any sensor direction, the mic is the same all 360 degree. There are only two hook like protusions to grab the sponge .

    Thanks again or your words,

    Happy riding

    Walter

      

    0

Iniciar sesión para dejar un comentario.