Sena 50s powering off by it self after turning on
So today when I was ready to ride, I put my helmet on and turn on my Sena 50s, after 3 seconds it just says "goodbye". At first I thought it was a battery issue since my last sena 50r was having a battery issue where it will not charge, but after charging the 50s for an hour and trying to turn it on it would turn off 3 seconds after, I was able to connect it to my phone really quick and see that the battery was full, so it's not the battery problem. I connected to the computer and show that I have the latest firmware. After messing around with it for half an hour I figured out that if I turn it on and keep holding the "phone" button for like 10 seconds it will stay on like normal. This is really frustrating since it didn't have this problem before, I just wondering if this is a software issue.
-
Mine just started doing this today. Your fix works. Sena, can you have a look at this? 50S-10 running firmware 2.1
0 -
What do you mean by “phone button”? Having same issue.
0 -
I am same here. When I turn on Sena 50s , there will connect to Phone just 1~3 second , then it would turn off by itself. And I found that battary life is unstable !!! It may show different % when I finish chage. So I think that problem is quick charge damaged the device . haha but I bought it by other country , My country can't provide insurance ... Hope there can launch some premium product.
-1 -
By the way, push the power on bottom then keep "P" 10 sec , it work! but it seem mesh function would broken.
0 -
Same problem where is the button on the phone?
0 -
Same is happening to me. Was a solution ever found? Factory reset had no effect.
0 -
Same issue on mine. The fix works but it is annoying. What is Sena going to do about this issue. My unit has less than 20 hrs of use. I do not have original packaging to return it for an exchange.
0 -
Mine has done the same thing since the day I bought it. Verified that I have the latest firmware, made sure the batter is fully charged, and tried hard resetting (pin hole button). I have a 20 s on another helmet and it has never failed me.
Really disappointed in the 50S0 -
Mine is doing the same thing, starting on my last ride. Continuing to hold the Phone button when powering on for a bit (at least 10s) did work to keep it on. At least it's usable again. This happened right after it was charged with a higher power Anker USBC charger, but everything should be USBC compliant so that shouldn't matter. I have charged it with that charger before. I will say my Sena 30k died after I charged it one day with an unknown charger, that might have been high power, but that is not USB C and so doesn't have the same leeway for charging profiles as USBC should. Not saying Sena didn't get it wrong in some way.
When i called Sena the nice support person said to try plugging it in, doing a pin reset, and letting it charge fully (which it already was). I did that, let it charge overnight. Didn't fix it. Holding the Phone button is a workaround.
Anyone find a fix?
0 -
Mine has started to do the same, it was fine one day and the next it started doing this, I have raised a ticket but yet to be resolved. Has anyone had theirs fixed or know of a work around?
0 -
Was this ever resolved?
I bought the 50B module for my HJC helmet in April 2025 and after day 3 and the 3rd overnight charge this started.
The charging LED is not lit up either any more.0 -
Brand new Sena 50R shutting down issue:
You hear "goodbye" and shutdown after turning on Sena 50R.
You can keep it on by holding phone button, but mesh fails.0
Iniciar sesión para dejar un comentario.
Comentarios
12 comentarios