
Lu Vencl
- Actividad total 77
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 0 usuarios
- Votos 6
- Suscripciones 20
Resumen de la actividad
Última actividad de Lu Vencl-
Lu Vencl hizo un comentario,
Thanks for responding. It initially did not work but realized I had to update the device manager. The update worked and that’s how I will do it.
-
Lu Vencl hizo un comentario,
Can it be upgraded from a computer instead?
-
Lu Vencl hizo un comentario,
So I just found this thread as I was having trouble as well and sure enough I am using special characters for my password. Question is, I change my SID and password completely and now I can’t get i...
-
Lu Vencl hizo un comentario,
One thing to point out as an improvement to the TX audio, it to put in series a .001 uF capacitor (may have to play with this value to obtain the desired sound) Reason is that the Yasue has TX audi...
-
Lu Vencl creó una publicación,
Profile allow list option
In order to compensate for some products that may not adhere to the strict profile signaling protocols, if perhaps within device settings, have an advance section (with note: For advance users only...
-
Lu Vencl hizo un comentario,
Gareth, Yes I have and I know others that have. Just know that the SR10 is NOT stereo. If that does not matter than you will be very pleased with how it works with the Yaesu. I did an extra mod tho...
-
Lu Vencl hizo un comentario,
Awesome! Dan, be sure to remember to use the 560 ohm resistor for the PTT
-
Lu Vencl creó una publicación,
Improvement notice on Firmware Ver 4.0 - Recognition and thanks to Sena!
This is more for the Yaesu FTM-10R/ SR users out there, but it seems as the latest firmware release Ver 4.0 has corrected the connect profile issue that we have seen with previous versions. History...
-
Lu Vencl hizo un comentario,
Any word on the "planned" fix in the next release for the adjustable mic gain on the SMH 10? Just a recap, I need lower levels just like the Ver 1 had. It has been since November now since I have ...
-
Lu Vencl hizo un comentario,
Dan, Any update on this fix?