Joshua Fletcher
- Actividad total 18
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 0 usuarios
- Votos 2
- Suscripciones 4
Resumen de la actividad
Última actividad de Joshua Fletcher-
Joshua Fletcher hizo un comentario,
The Sena +Mesh is a separate adapter. If you want to pair a Pi with a Mesh Intercom device (like your R1 Evo) you first need to pair the Pi with a +Mesh and then add the +Mesh to your Mesh Intercom...
-
Joshua Fletcher hizo un comentario,
After removing the above, and restarting, I was able to enable Memory Integrity. I have no need to reinstall the Sena software for now.
-
Joshua Fletcher hizo un comentario,
I think that's the wrong app to remove actually. Under Installed Apps I see this: I think that's the one to remove, will try it.
-
Joshua Fletcher hizo un comentario,
The above doesn't work. Even after uninstall and reboot the incompatible driver is still present.
-
Joshua Fletcher hizo un comentario,
Support was able to get me straightened out. I had to do a fault reset (plug helmet in, insert paper clip) and then let it charge for 3 hours. I suspect I must have left the helmet on and drained i...
-
Joshua Fletcher hizo un comentario,
Using device manager 4.4.0
-
Joshua Fletcher creó una publicación,
M1 Evo Won't Turn On, Firmware Update Loop
Just got a new M1 EVO. It turned on just fine out of the box. I connected it to a new R1 EVO via mesh and it worked fine. Turned everything off. Few hours later tried to turn the M1 EVO on so I cou...
-
Joshua Fletcher hizo un comentario,
Thanks for posting that. It never occurred to me you'd need a +Mesh for *each* Pi. I assumed the +Mesh would be some kind of central hub. Do you also have one of the helmets? Does it work? I'm cons...
-
Joshua Fletcher hizo un comentario,
Is the Pi not a "non-mesh headset"? Or did you mean "headset", because you can't connect more than one? Sorry I don't follow :( How long do you think the Pi lasts? 5 hours would be fine.
-
Joshua Fletcher hizo un comentario,
Just in case anyone else is wondering about the +Mesh: Called support. They said the +Mesh is only compatible with a *single* Sena Pi. You can't connect more than one Pi at a time. You can only co...