Peter

1. Comunidad
2. Feature Requests and Suggestions
3. SR10 Needs Ground-Loop Isolation

Hey Dan, I'm aware of the ground loop isolators with 3.5mm connectors. I have one for the radar detector but haven't installed it yet. My bigger issue is the two-way radio. I have a ground loop bet...

1. Comunidad
2. Feature Requests and Suggestions
3. SR10 Needs Ground-Loop Isolation

Hi Matt, I have the parts (including a set of Hirose connectors for a single cable connection to the SR10) but haven't had the time to put it together yet. When I have it finished I'll post the det...

1. Comunidad
2. Feature Requests and Suggestions
3. SR10 Needs Ground-Loop Isolation

Yeah, I understand how ground loops are formed. I also know about aftermarket isolators (and am currently using one between the radar detector and the SR10). The problem here is that those kind of ...

1. Comunidad
2. Feature Requests and Suggestions
3. SR10 Needs Ground-Loop Isolation

Ken, in my case the ham radio is connected to a bike mounted antenna and gets ground there even when running on its internal battery. The SR10 is also connected to a Valentine One radar detector wh...

1. Comunidad
2. Feature Requests and Suggestions
3. SR10 Needs Ground-Loop Isolation

Ken, given that "Optional 12V bike-powered kit with on/off control by ignition switch" is one of the feature bullet points listed on the Sena web site for the SR10, I don't think it's reasonable to...

1. Comunidad
2. Feature Requests and Suggestions
3. SR10 Needs Ground-Loop Isolation

Ken, I don't believe Sena is planning on anything other that what they have already delivered, the SC-A0103. Maybe at some point they'll make a version with bare leads instead of a cigarette lighte...

1. Comunidad
2. Feature Requests and Suggestions
3. Sensitivity control for intercom VOX

I have the same problem, the intercom connection drops off constantly during a VOX conversation. Adding some hysteresis to the VOX sensitivity would help (i.e.: you still need the same sound level ...

1. Comunidad
2. Feature Requests and Suggestions
3. Allow the user the option to keep A2DP stream active during SR10 Audio mixing

Let me add a big +1 to this feature request. I'd also like the ability to keep the A2DP stream going during either SR10 input or intercom, just drop the volume of the A2DP stream instead of blankin...

1. Comunidad
2. Feature Requests and Suggestions
3. SR10 PTT Reprogram?

Hi Rich, I use a Ham radio myself with the SR10 and I don't notice any of my local repeaters continuing to transmit, they all drop carrier right after the sender does*. I'm new to Ham so I'm mostly...

1. Comunidad
2. Feature Requests and Suggestions
3. SR10 PTT Reprogram?

Hi Rich, I just looked through the manual for your radio and I can't find a way to turn BCLO on or off, the only mention of a similar function I see is the VOXonBUSY (menu 20), you might try turnin...