FAIL TO RECOGNIZE DEVICE- CAN'T OPEN USB.
After trying three different computers and no respons from the device, I mailed the helpdesk. THey would call me tonight.
As I had a little brainwave before the call, I changed the micro usb cable that was delivered with the 10c and used an old cable (from my previous sena smh5)
and guess,...... tatatatatataaaaaa............... it functioned, no problem at all.
greetings
Mark (living in the Netherlands)
-
I did the same (I have a Sena 5), retrieved the cable from the Sena box and it worked. Update froze at 3% A blank drop-down box appeared.Just as a try I pressed and held power-up. Update continued. At 98% same thing and it completed. With the second device the same thing but the drop=down box now said press and hold the phone button. This transpired to be the red button. at 82% same thing only this time the box said joggle and phone buttons together. Update completed successfully. So thank you M4rkbos!
0
Vous devez vous connecter pour laisser un commentaire.
Commentaires
1 commentaire