I'm using a SMH10 with a Iphone 4S and a Zumo 350lm

Brad Woodlief

19 février 2014 02:25

I want to be able to have both work at the same time or turn the zumo off.  If I use SENA SMH-A0108 3.5mm Stereo Audio Cable will I be able to mute the Zumo?

0

• 

  Pablo Motta

  19 février 2014 16:43

  You can pair both iPhone and zumo with your SMH10. You need to pair the zumo using Multipoint pairing (below).

  1. Turn on the SMH10 and press the Jog Dial for 5 seconds until the red LED is rapidly flashing and you hear multiple beeps.
  2. Within 2 seconds, tap the Phone Button (smaller button), then the LED turns to blue flashing and the beeps turn to high tone double beeps. You will hear a voice prompt saying “Multipoint pairing”.
  3. Search for Bluetooth devices on the GPS navigation screen. Select the Sena SMH10 in the list of the devices detected on the GPS.
  4. The GPS confirms that pairing has completed and the SMH10 is ready to use. You will hear a voice prompt from the SMH10 saying “Your headset is paired”.

  0

Vous devez vous connecter pour laisser un commentaire.