X-Com 3 Pro
Good morning. I have just received my X-Com 3 Pro unit and there seem to be some issues.
Initially it paired with my Samsung S24 Ultra but then the Voice Prompts didn't work (which according to the manual there are standard prompts that should work).
I then updated the firmware to the latest v1.0.1 but still the prompts don't work. So I unpaired it and it would then not pair again, and the only thing that worked is a factory reset.
However, when my S24 finds the unit and states that it's paired, the unit continues to blink as if it's waiting to be paired and then switches itself off (I suspect this is the 3 minute phone pairing mode as per the manual).
When it has been paired I've used the Sena app to try and configure it but all it does is connect, then disconnect, connect again, disconnect again until it shuts itself off. As I mentioned before, although the manual says that certain Voice prompts are always on, they do not work on this unit. I have also tried voice commands and they do not work either.
I use a SRL Mesh unit in another of my helmets and it works fine, so I know how to connect and configure the unit so I'm hoping someone can suggest some troubleshooting ideas rather than me having to send the unit back to Europe?
-
Problem solved. Regressed the firmware to v1.0.0 and all functions working.
1 -
Are the "Sena" voice commands working after downgrading to v1.0.0?
My x-com pro unit came with v1.0.1 and only google (android user here) assistant is working.Also I cannot connect to Cardo units with mesh/open mesh and bluetooth as well...
0 -
Just figured it out... You need to say "Hey SeeNah", not "Hey Sena".. speak murican
0 -
Mine has come with v1.0.1 already and yes no voice commands working at all and unfortunately whichever way you say HEY SENA doesnt work.
@Hylton did you then having reverted to previous firmware found that certain features dont work then? Odd that they would push 101 and not tested and validated that first. Where did you get the previous version firmware from also, was it from the sena download manager?
0 -
Hello. Just got my nexx we3 and xcom 3 pro and I can confirm that voice commands are not working. Only check battery and hey Google.
Sena support says no other fw is available and that new set is option.
We need new fw Sena.
Coming from years with Cardos this really bad.
Where can I get fw v1.0.0 that is mentioned here0
Vous devez vous connecter pour laisser un commentaire.
Commentaires
5 commentaires