Pair an SPH 10 headset with a bluetooth hearing aid
0
-
Pairing a Sena SPH10 headset with a Bluetooth-enabled hearing aid depends on the capabilities of the hearing aid. Here's how you can attempt to pair them:
Steps to Pair SPH10 with a Bluetooth Hearing Aid:
1. Put the SPH10 into Pairing Mode:
- Turn on the SPH10.
- Press and hold the Phone Button for 5 seconds until you hear the prompt "Phone pairing."
- The LED will flash blue and red alternately, indicating it is in pairing mode.
2. Put the Hearing Aid into Pairing Mode:
- Refer to the hearing aid's manual for instructions to activate Bluetooth pairing mode.
- Usually, this involves using an app or holding down a specific button on the hearing aid or its companion device.
3. Connect the Devices:
- Once both devices are in pairing mode, wait for the SPH10 to detect the hearing aid.
- If successful, the SPH10 will announce that it is connected, and the hearing aid should confirm the connection (either via its app or audio feedback).
Things to Consider:
- Compatibility: Hearing aids often use proprietary protocols for Bluetooth connections (e.g., Made for iPhone [MFi] or ASHA). The SPH10 may not be fully compatible unless the hearing aid supports standard Bluetooth audio profiles (A2DP or HFP).
-
Alternative Setup: If direct pairing isn't possible:
- Pair both the SPH10 and the hearing aid to a smartphone.
- Use the smartphone as an intermediary to route audio between the devices.
- Mono Audio: The SPH10 is designed for mono audio. If your hearing aid expects stereo sound, you may experience reduced functionality.
Troubleshooting Tips:
- Update Firmware: Ensure both devices have the latest firmware for compatibility improvements.
- Reset Pairing: Clear the pairing history on both devices and attempt pairing again.
- Consult Manufacturer Support: Contact Sena or your hearing aid's manufacturer for advice if pairing isn’t successful.
If direct pairing proves impossible, using a smartphone or a third-party audio transmitter that supports both devices may offer a workable solution.
0
Vous devez vous connecter pour laisser un commentaire.
Commentaires
1 commentaire