mesh 1.0 v 2.0 Sena 30K 50S
Hi all,
I have 4 Senas (two 30K, two 50S). They are all on the latest firmware (v3.4 30K - SP46). It appears now that I cannot communicate between the 30Ks and the 50Ss on Mesh.
Is that because of Mesh 2.0? Are the 30Ks stuck on Mesh 1.0 and I cannot upgrade them to Mesh 2.0 because of the model/hardware?
I have a buddy with a 50S... and I need to be on 2.0 to communicate with him, but cannot then communicate with my family. This seems dumb.
Is my only option to replace the 30Ks?
And now I'm reading there is Mesh 3.0...jesus.
-
so - the solution to this problem is to disable Mesh 3.0 on the 50S. It would be good to document this somewhere on the Sena website... not sure how normal humans can figure out that 50S added Mesh 3.0 (when did that happen) and that it is enabled by default (pretty sure I didn't enable it) and that it doesn't work with either Mesh 1.0 or Mesh 2.0 - there is no way that I am aware of to tell what my 30Ks are running.
Also, I cannot connect my 30Ks to the app anymore. Says I need a firmware upgrade. But I can't upgrade my firmware. So just no more app support for me on the 30Ks?
How about an article about how Mesh 1.0, 2.0 and 3.0 are different and how they are compatible? I'm guessing 2.0 is compatible with 1.0, and 3.0 is compatible with 2.0, but 3.0 doesn't work with 1.0 which is what I'm on with v3.4 30K. Sena - where is this written down?
**EDIT from further in this thread**: Suspect Mesh 1.0, 2.0 and 3.0 do not interoperate. Mesh 2.0 ships on 30K. Mesh 2.0 and 3.0 ship on 50S and through the app Mesh 3.0 can be turned off to work with 30Ks.
Am I being rewarded as a loyal Sena customer or punished here?0 -
Recientemente Sena ha sacado la actualización del Software v4.4.1, para el Sena 30K , que trae incorporado el "Mesh 3".
Una vez que se actualizó, noté que ya no sincronizaba con mis contactos anteriores, así que me puse a revisar la aplicación del móvil, y pude constatar que se había configurado por si solo a "Mesh 3", entonces, simplemente lo deshabilité y lo puse en Mesh2 y volvio la conexión con todos mis contactos.
Lo que pasó luego, fue que todos actualizamos el firmware y entonces ya conectamos a través del Mesh3.
En conclusión: El dispositivo Sena30k solo se conecta en Mesh con la misma frecuencia de Mesh , osea: el Mesh2 con Mesh2 y Mesh3 con Mesh3, es decir, que No funcionan : el Mesh 3 con Mesh 2.
EN MI OPINION PERSONAL: No entiendo que inicialmente nos vendan de fabricar un equipo limitado con el Mesh1 ó Mesh2, y con una simple actualización de software se pueda cambiar a la versión a Mesh3, ello quiere decir, que juegan con la frecuencia por programación y no por limitación de componentes electrónicos nuestros dispositivos; por lo que vuelvo a mi comentario inicial, si la mejora se puede hacer a traves del sofware, entonces, PORQUE NO LOS VUELVEN COMPATIBLES A TODOS POR IGUAL!!!!,
A mi parecer y según mi lógica debería ser compatibles entre sí todas las versiones del Mesh (incluidas las más antiguas), pero, ya vemos que Sena no quiere que esto suceda.
0 -
"I'm guessing 2.0 is compatible with 1.0, and 3.0 is compatible with 2.0, but 3.0 doesn't work with 1.0 which is what I'm on with v3.4 30K."
Mesh 2.0 and 3.0 are not compatible and can' communicate with each other. We have here posts from 50x users telling, they can't communicate after they have upgraded their firmware in January '25. The communication worked again after switching back to Mesh 2.0 in settings in the Sena Motorcycle App.
I assume the same is with 1.0 and 2.0, but I'm not sure for 100% ...
0 -
Wouldn't it be nice to not guess? If only we had a Sena community site to post questions to. Sena, please publish what models/versions support each version of Mesh and what firmware version that support first appeared, and please publish cross compatibility (if any). We are several thousand dollars into your hardware and can't tell what should work and what won't work.
Also publish which model/hardware versions your App supports and why Sena has apparently ended App support for 30K SP46.
0 -
Great article! The inability to connect between Mesh versions on Sena is a real pain, especially when it comes to staying in touch with a group. Similar to https://geometrydash2.co Geometry Dash, compatibility between elements is crucial for a smooth experience. If 30K can’t upgrade to Mesh 2.0, perhaps a replacement is the only solution to ensure a stable connection.
0 -
Great article! The inability to connect between Mesh versions on Sena is a real pain, especially when it comes to staying in touch with a group. Similar to https://geometrydash2.co Geometry Dash, compatibility between elements is crucial for a smooth experience. If 30K can’t upgrade to Mesh 2.0, perhaps a replacement is the only solution to ensure a stable connection.
I have 2 30Ks (old hardware version) and my newer 50S devices can all communicate on Mesh together if Mesh 3.0 is disabled on the 59S. That likely means they all support Mesh 2.0, or Mesh 1.0 is compatible with Mesh 2.0.
Wouldn't it be nice to have this documented so we don't have to guess?
0 -
or Mesh 1.0 is compatible with Mesh 2.0.
Are you sure your 30K operate on Mesh 1.0 ? I'm not sure 1.0 and 2.0 can speaks to each other, but will be happy when it is true 🤗
0 -
Are you sure your 30K operate on Mesh 1.0 ? I'm not sure 1.0 and 2.0 can speaks to each other, but will be happy when it is true 🤗
At this point I don't think so. I suspect the 30K is running Mesh 2.0, even if on older hardware. Also, I doubt Mesh 1.0, 2.0 and 3.0 interoperate.
https://community.sena.com/hc/en-us/articles/32694618060436-Mesh-Version-Switch
0
Vous devez vous connecter pour laisser un commentaire.
Commentaires
8 commentaires