Problem with Intercom mesh

Gianluca

17 mars 2025 19:58

Hello, I purchased the Sena Spider rt1 kit (2 devices) correctly mounted on the helmets, I configured everything according to the instructions, the devices connected with Bluetooth work correctly, but when I use the mesh network (public or private) it tells me, Intercom mesh network active on both devices but the two intercoms cannot be heard, I tried to make a call with the phone and everything works correctly, so the microphones are connected correctly, I also tried to update the firmware to version 2.4, but they do not work. What could it be? Do you have any solutions? Thanks a lot

0

• 

  Merlin

  18 mars 2025 12:15

  simple one - channel is set the same? both running same firmware?

  0
• 

  Gianluca

  18 mars 2025 12:17

  hi, yes yes, they are on the same channel and above all with the same firmware, but they still can't be heard

  0
• 

  Merlin

  18 mars 2025 12:25

  one last idea. i recently updated to new versions and now there is an option to select the mesh version in the app. on one device it was set to the mesh 3.0 the other to 2.0 you need to set both the same

  maybe worth checking

  0
• 

  Gianluca

  18 mars 2025 12:27

  I'll check, but on both devices I set mesh 3.0, I even tried to reset it, but unfortunately nothing changes

  0
• 

  coyilan

  27 mars 2025 07:19 Modifié

  one last idea. i recently updated to new versions and now there is an option to select the mesh version in the app. on one device it was set to the mesh 3.0 the other to 2.0 you need to set both the same. Can Am Maverick X3 Accessories

  0

Vous devez vous connecter pour laisser un commentaire.