20s Can't hear audio from two bluetooth devices at the same time
I've been trying to get my setup going for my iPhone (music) and Taotronics BA07 bluetooth transmitter (radar detector)
My plan was to pair both my iPhone and BA07 to the Sena 20s and was hoping the Sena would treat the transmitter like a GPS device and play audio from both simultaneously
I can successfully pair both devices to the Sena without much issue, however it will only play audio from one device OR the other, but not at the same time, which totally defeats the purpose as I wanted to be able to listen to music, and when the radar needs to chime in it would play through the headset
So basically, if music is playing from my iPhone, nothing coming in from the BA07 transmitter will be heard. If I stop the music entirely, then the BA07 sounds come through. So it's "either or" situation but not both at the same time.
I've tried pairing with the iPhone both as the primary phone device, and also as the secondary 'media' device, same results both ways.
The BA07 uses aptX if that has any relevancy and maybe the Sena isn't reading it the way I'm expecting it to
If anyone has any input on this that'd be great
-
Hi Kev. Have you tried to pair it to the Sena as a GPS device? Check Sena manual for GPS pairing and give it a go. It may not be possible as this is a third party device not necessarily designed to function in the manner you want it to.
0 -
Hi Ken, yes I've tried that. It does pair just fine, the issue is it won't play audio from both. If the music is playing nothing from the other device comes through. Once I stop the music the other device (radar detector) sounds come through fine, just not both together.
0
Vous devez vous connecter pour laisser un commentaire.
Commentaires
2 commentaires