Mesh connection between phantom and Stryker

Chip Bott

3 septembre 2026 11:50 Modifié

I have 2 new helmets, a phantom NC and a Stryker, both have current firmware and running mesh 3.0. They will not connect in any way…help!!

0

• 

  Hellen charless

  7 septembre 2026 09:16

  Try putting both helmets on Open Mesh, Channel 1 then toggle Mesh off and back on. If they still would not connect, switch both to Mesh 2.0 and try again. Also make sure both have the latest firmware and are using the same Mesh mode.

   

  0

Vous devez vous connecter pour laisser un commentaire.