Ken Kimari
- Activité totale 580
- Dernière activité
- Membre depuis
- Abonné à 0 utilisateur
- Abonnés 0 utilisateur
- Votes 0
- Abonnements 186
Commentaires
Activité récente par Ken Kimari-
Here is a list of the firmware updates for the 50S according to the Sena website. Note the part number of your unit. https://www.sena.com/us-en/product/50s/firmware-history
-
They are available through Cycle Gear. https://www.cyclegear.com/accessories/sena-hd-speakers-50s-30k-20s-evo-20s?sku_id=10006852
-
No experience with Cardo JBL speakers or using RC 3. I did buy the Sena HD speakers when they became available for the 20s evo and found them to work much better than the standard speakers plus th...
-
Paul - could it be that your jacket collar or something else is pushing on the ambient sound button on the bottom of the sena mount? I had the problem you described with my 20s and found that to b...
-
Did your 20s come with HD speakers? If so turn on the HD speaker accessory under basic settings in the Sena Utility App and adjust audio equalizer listed below the HD speaker accessory. That may ...
-
A couple of things. Make sure the center of the speaker is aligned with your ear canal. You may have to reach in with a finger to feel around when your helmet is on. If it is offset just a bit th...
-
Your first step is correct to put both units in pairing mode. Once they are in pairing mode (blue flashing) you then need to tap the intercom button once on either unit, NOT BOTH! Give it a few m...
-
Yes to both questions. Phone pairs separately to the unit.
-
Yep. Sena is correct. You can pair up to three additional units with your 5s but only can talk to one of them at a time. There is no feature that allows a "daisy chain" connection which allows a...
-
Sena came out with HD speakers as standard in Sept last year. I would do a fault reset on the unit as well as a factory reset. Then delete the pairing from the phone and re-pair it. May also chec...