Tom Balaban

1. Communauté
2. Feature Requests and Suggestions
3. Combination speaker/earphone baseplate?

Startv, Do with the cable what you do with your earbuds. I put mine in the same pouch I use for the earbuds when I'm not wearing them and that stays in my tank bag. That way I lose everything in on...

1. Communauté
2. Feature Requests and Suggestions
3. Combination speaker/earphone baseplate?

Stuartv, I use my SMH-A0303 base with the original helmet speakers. This required disconnecting the speakers from the original base and adapting the 3.5mm coiled extension cable that came with one ...

1. Communauté
2. Feature Requests and Suggestions
3. Create a SR10 2 way radio cable for the Yaesu FTM-10R / FTM-10SR

It's in the Yaesu FTM10 Pinout PDF in the post above.

1. Communauté
2. Feature Requests and Suggestions
3. Create a SR10 2 way radio cable for the Yaesu FTM-10R / FTM-10SR

Gareth, Attached are the pin-outs for the FTN10 and the Sena SR10 Cable. Please note: All you need is the 6 pin Hirose connector pinout on the right side of the SR10 sheet Sena SR10 Cable Pinouts.p...

1. Communauté
2. Feature Requests and Suggestions
3. Create a SR10 2 way radio cable for the Yaesu FTM-10R / FTM-10SR

I'm sure it will work with both. When I get home on Wednesday I'll post the pin-outs.

1. Communauté
2. Feature Requests and Suggestions
3. Create a SR10 2 way radio cable for the Yaesu FTM-10R / FTM-10SR

I'm sure it will work with both. When I get home on Wednesday I'll post the pin-outs.

1. Communauté
2. Feature Requests and Suggestions
3. Create a SR10 2 way radio cable for the Yaesu FTM-10R / FTM-10SR

Yes, Refplusten.  I have two VX-6Rs and have used the CT-91 to connect to the more common ICOM connectors on my old Motocomm and Autocom systems. It works great with the SR-10 as well. It's super e...

1. Communauté
2. Feature Requests and Suggestions
3. Combination speaker/earphone baseplate?

Gennadiy,   Any detail/photos you can provide on this solution are appreciated.   Thanks.

1. Communauté
2. Feature Requests and Suggestions
3. Create a SR10 2 way radio cable for the Yaesu FTM-10R / FTM-10SR

The SR10 comes with a decent PTT switch that attaches near your hand grip. I prefer a semi-permanently mounted switch and have installed an Air Rider PTT switch (http://www.airrider.com/product_p/0...